Services
COMPLETION CHEMICALS / CASING CLEANING
Our philosophy;
Meet SPEC for cleanliness with fast seawater cut-off point with lowest possible
effect on the environment, subsequent operations to go ahead as planned.
|
|
Chemicals supplied & recommended based on laboratory testing and previous
experience may include: soaps, detergents, flocculants, pipe-dope removers,
lubricants and oxygen scavengers.
REMEDIAL SERVICES
Asphaltene, Wax and Scale Dissolvers
Radioactive decontamination of oilfield equipment
PRODUCTION & PROCESS CHEMICALS
Tailormade to your needs; demulsifiers, deoilers, corrosion inhibitors, scale
inhibitors, asphaltene inhibitors, wax inhibitors,
wax dissolvers, asphaltene dissolvers and scale dissolvers.
CEMENTING ADDITIVES
Fluid Loss Additives, Dispersants, Defoamers, Spacers & Chemical Washes, and,
Lubricants to ensure continuation of rotation of the liner throughout cementing,
especially in extended horizontal wells.
CEMENT-LABORATORY TEST EQUIPMENT (CTE)
|
Old Halliburton UCA before refurbishing |
The same UCA after refurbishing by CTE. Imagine getting a like- new instrument for a fraction of the cost of a new one.
|
|
One of our specialties is rebuilding old consistometers. As the photos below show, we can turn an old consistometer into a like new consistometer for only a fraction of the cost of a new instrument.
|
|
|
|
|
|
The above photos show a consistometer before we rebuilt it. It apparently had been sitting outside for some period of time.
|
|
|
|
This photo shows the consistometer after being rebuilt by CTE. Imagine what we can do for your old machine!
|
OIL SPILL ABSORBENT
"Oilsorb" absorbs oil - not water.
|
 |
 |
 |
 |
 |
RX-72TL BRINE LUBRICANT / FRICTION REDUCER
"Multifunctional Additive"
Stat. A-35AT2; 2 3/8” CT1000 inside 7”monobore |
Utilised in a variety of APPLICATIONS to reduce metal / metal friction:
| Completions | Casing Cleaning; continuous
rotation of DP Running of completion equipment.
|
| Snubbing | rotate your snubbing string in long
horizontal wells (longest horizontal section =7200m, reduction in torque at
TD = 43%) |
| Coil-Tubing | further access to deep /
extended wells (40 % reduction in friction achieved!) |
| Wireline | reach logging
depth in deviated wells
|
| Drilling | reduce torque &
drag
|
| Milling | reduce torque
(ref. Aasgard, temp = 165C, 30% reduction in torque) |
| P & A | retrieving your
tubulars
|
| Cementing | rotate your liner |
